Evo-stik Decorators Filler White

Tetrion Flexible Wood Filler is an easy-to-use, ready-mixed filler suitable for interior and exterior use. The filler bonds strongly to wood and leaves a water-resistant, super-smooth finish, which can be stained, varnished or painted. Tetrion Flexible Wood Filler is resistant to shrinking or cracking and is suitable for wood-filling repairs to doors, skirting boards, floor boards, window frames, nail holes, etc.ADVANTAGESSuper smooth and flexibleShrinking and cracking resistantInterior/Exterior UseEasy sandingCan be nailed or screwedRapid drying and low odor APPLICATIONEnsure surfaces are dry clean and free from dust and loose materials. Remove all decayed wood down to dry, sound materials. Allow damp wood to dry completely.Stir filler thoroughly to form smooth paste.Apply with filling knife, pressing filler firmly into repair. Smooth off.Build up deep repairs in layers no more than 5mm. Allow each layer to dry thoroughly before applying next layer.Filler starts to set in approximately 2-3 hours, depending on the depth of the filler and temperature/humidity. Allow thicker layers (above 5mm) to set overnight.Once dry, sand smooth and paint, stain or varnish.After use, to keep remaining filler in perfect condition, replace plastic disc, cover with damp rag and reseal lid.Wash tools with warm water.Store away from frost.Note: Avoid using in wet or damp conditions. If rain or moisture is expected, cover repair with waterproof material until filler has fully set. Protect from temperatures below 5°C until set. Filler may stain/varnish differently to surrounding timber. Test on a small area to assess whether appearance is acceptable.

Tetrion All Purpose Filler is tough and water-resistant. Developed to be highly versatile, it can be used for either interior or exterior jobs. Tetrion seals, bonds and fills most household materials including, plaster, wood, stone, concrete, glass, metal, brickwork and stucco. ADVANTAGESVibration and shrink resistantFor interior and exterior useCan be drilled and tappedVery smooth finishTetrion All Purpose Filler is suitable for filling cracks, holes and gaps in plaster, wood, stone, brickwork and many other building materials.APPLICATIONEnsure the surfaces are dry, clean and free from dust and loose materialRemove all decayed wood down to dry, sound material and allow damp wood to thoroughly dry out before applying fillerDo not use on surfaces regularly underwater and do not sandwich between layers of paint.Prime nails and screw heads, etc. with oil based paint before applying the filler.Add 2-2.5 part filler to 1 part water and mix thoroughly to form a smooth paste, addingore water orpowder as necessaryOnce mixed leave for a few minutes prior to use. Paste remains workable for up to 50 minutes.Apply with a filling knife, filling to a level just above that of the surrounding surface and smooth off with a wet bladeSetting time is approx. 2 hours depending on conditionsAfter 24 hours the filler can be painted with most household paints. Over paint with an oil based paint when used externally

The Ronseal Multi Purpose Wall Filler is a general purpose filler, based on Acrylic Polymer and fine Dolomite fillers, for interior and exterior use,and Surface dry in 1 to 2 hours.Ronseal multi-purpose produces an extremely smooth finish and has excellent application properties coupled with strength and flexibility.Ideal for making repairs to plaster, stone, concrete or wood. It is easy to sand and gives excellent adhesion, also gives a long lasting repairs that wont shrink or crack.